Auto Belays (Perfect Descent)

PD_SPEED.jpg

SPEED DRIVE AUTO BELAY

IFSC speed competition

Official Record Recognized Auto Belay

PD_DIRECT.jpg

DIRECT DRIVE AUTO BELAY

-Specifications

1.Maximum use height: 16.2m type / 12.2m type / 8.5m type

2. Classification of use: speed only / general use

3. Carabiner Selection: Steel / Aluminum

4. Descent speed: 2m/s ~ 0.5m/s

5. Pulling speed: Speed ​​4.6m/s / Direct 0.6m/s


6. Rated working weight: 11.5~140Kg

7. Housing material: stainless steel and aluminum resistant to corrosion

8. Lanyard length: 28-53 ft (8.5 m to 16.2 m) long, comprised of 1 in Nylon Spectra

9 Lanyard breaking strength: 15.6kN


10. Housing size: 400 mm x 240 mm x 190 mm

11. Device weight: 13.1~14.1 kg (depending on lanyard length and carabiner type)

12. Housing waterproofing

13. Delivery period: takes around 30 days

14. Product recertification period

• Recertification every 1 year: 230 models (products produced after July 2020) / Class A

• Recertification every 2 years: 220 models (products produced before June 2020) / Class C

• Most of the products classified as Class C can be updated to Class A through the next periodic recertification, but products updated to Class A are subject to the Class A recertification program.

• 220CR model cannot be updated to Class A, and trade-in sales are available when the purchaser of this product replaces it with Class A.

14. Certification

• ANSI/ASSE Z359.4: Safety Requirements for Assisted-Rescue and Self Rescue Systems, Subsystems, and Components
• Conforms with EN341:2011-1A/RFU PPE-R/11.128 Version 1 and EN360:2002. -Requires periodic recertification every 12 months or sooner as determined by a Competent Person
• AS/NZS 1891: Industrial Fall-Arrest Systems and Devices-Part 3: Fall Arrest Devices
• CSA Z259.2.3-99: Descent Control Devices

15. Liability insurance subscription

PD_LOGO.jpg
001FE2A7C3C30E7A38E56BCF1E0D3064_1.jpg
001FE2A7C3C30E7A38E56BCF1E0D3064_2.jpg

-Price information (reconnaissance price system / additional tax included)

1.SPEED-Steel carabiner (8.5m-3,370,000 won / 12.2m-3,410,000 won / 16.2m-3,450,000 won)

Aluminum carabiner (8.5m-3,403,000 won / 12.2m-3,443,000 won / 16.2m-3,483,000 won)

2. DIRECT-Steel carabiner (8.5m-3,123,000 won / 12.2m-3,163,000 won / 16.2m-3,220,000 won)

Aluminum carabiner (8.5m-3,156,000 won / 12.2m-3,196,000 won / 16.2m-3,252,000 won)

 
Recertification Program

Shipping packaging required (other packaging not allowed)

-PERFECT DESCENT Auto-Belay recertification

1. This is a management program by the manufacturer to keep and operate the Auto Belay at least safely.

2. All Autovilays are obligated to re-certify every 1-2 years from the time they are supplied from the manufacturer.

• Recertification every 1 year: 230 models (products produced after July 2020) / Class A

• Recertification every 2 years: 220 models (products produced before June 2020) / Class C

• Most of the products classified as Class C can be updated to Class A through the next periodic recertification, but products updated to Class A are subject to the Class A recertification program.

• 220CR model cannot be updated to Class A, and trade-in sales are available when the purchaser of this product replaces it with Class A.

3. If there are no mechanical defects in the supplied product for two years from the date of use or 30 months from the date of manufacture (whichever comes earlier), the product is considered to be free of defects.

4. Even within the recertification period, you must get A/S when you suspect a mechanical defect.

5. The lanyard is a consumable part, so the replacement time may vary depending on the frequency of use and the environment of use, so check it frequently and replace it immediately if wear or damage is severe.

6. All A/S and recertification must be done within the service center.

7. In the case of recertification by the official A/S center, costs may be added depending on the certification fee and webbing replacement and other parts replacement during the certification process.

-Re-authentication procedure

1. Counseling and sending of request form: Sending the request from the homepage after consultation

2. Re-certification schedule and cost consultation

3. Delivery: must be delivered by courier in the original packaged state (delivery cost to the client)

4. Discussion of replacement parts or special items and cost during the disassembly process

5. Completion of authentication service

6. Payment of authentication service cost

7. Delivery (delivery cost to the client)

-Re-authentication service cost

1. Recertification fee

• Class A-Direct Drive KRW 230,000 (not supplied by our company KRW 300,000)

-Speed ​​Drive 245,000 won (not supplied by our company 320,000 won)

• Class C-360,000 won (460,000 won for unsupplied by our company)

2. Webbing replacement fee: Steel carabiner (16.2m type-398,000 won / 12.2m type-357,000 won / 8.5m type-315,000 won)

Aluminum carabiner (16.2m type-432,000 won / 12.2m type-390,000 won / 8.5m type-349,000 won)

3. Other parts replacement cost is quoted separately

4. VAT, shipping, and travel expenses are not included

5. When requesting a packing box: 50,000 won (20,000 won refund after collecting the box)